O
PERATION
Tilt Angle
To set the tilt angle range on the Intimidator Hybrid 140SR, follow the instructions below:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Tilt Angle.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select from 270 (270°), 180 (180°), or 90 (90°).
7.
Press <ENTER>.
Totem Mode
To activate the Totem mode, do the following:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Totem Mode.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select OFF (normal range of motion), UP (upward tilt range), or DOWN
(downward tilt range).
7.
Press <ENTER>.
Lamp Settings
Manual Lamp Control
To turn the lamp on or off on the Intimidator Hybrid 140SR, follow the instructions below:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Lamp Setting.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select On/Off.
7.
Press <ENTER>.
8.
Use <UP> or <DOWN> to select OFF or ON.
9.
Press <ENTER>.
Lamp State at Power On
To define whether the lamp should be on or off when powering on the Intimidator Hybrid 140SR, do the
following:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Lamp Setting.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select State/Power On.
7.
Press <ENTER>.
8.
Use <UP> or <DOWN> to select OFF or ON.
9.
Press <ENTER>.
Intimidator Hybrid 140SR User Manual Rev. 2
Page 18 of 29