Table of Contents
Advertisement
O
PERATION
Configuration (Settings)
Pan Reverse
To set the pan orientation on the Intimidator Beam 355 IRC, follow the instructions below:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Pan Reverse.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select OFF (normal pan orientation) or ON (reverse pan orientation).
7.
Press <ENTER>.
Tilt Reverse
To set the tilt orientation on the Intimidator Beam 355 IRC, do the following:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Tilt Reverse.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select OFF (normal tilt orientation) or ON (reverse tilt orientation).
7.
Press <ENTER>.
Screen Reverse
To set the display orientation on the Intimidator Beam 355 IRC, follow the instructions below:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Screen Reverse.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select OFF (normal display orientation) or ON (reverse display
orientation).
7.
Press <ENTER>.
Pan Angle
To set the pan angle range on the Intimidator Beam 355 IRC, do the following:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Pan Angle.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select from 540 (540°), 360 (360°), or 180 (180°).
7.
Press <ENTER>.
Tilt Angle
To set the tilt angle range on the Intimidator Beam 355 IRC, follow the instructions below:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Tilt Angle.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select from 270 (270°), 180 (180°), or 90 (90°).
7.
Press <ENTER>.
Intimidator Beam 355 IRC User Manual Rev. 1
Page 13 of 20
Advertisement
Table of Contents
