Settings; Control Mode; Pan/Tilt Orientation; Display Orientation - Chauvet MAVERICK MK2 SPOT User Manual

Settings

To reach the Settings menu, follow the instructions below:
1. Press <MENU> repeatedly until the
2. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Settings, or touch the display where it says
Settings.
3. If using the buttons instead of the touchscreen, press <ENTER>.

Control mode

The Maverick MK2 Spot can be set to respond to DMX, WDMX, Art-Net™, or sACN. The protocol
configuration must be set for the product to respond correctly to the controller(s). See the
more information. To configure the protocol for the Maverick MK2 Spot, follow the instructions below:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Control Mode, or touch the display where it says Control Mode.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select DMX, WDMX, sACN, ArtNet, or touch the
display where it says the desired option.
5. Press <ENTER>.
For WMDX control, ensure the antenna is raised, and there are no obstructions
between the controller and the product. See
information.

Pan/tilt orientation

To set whether the pan or tilt orientation is normal or inverted:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Pan Reverse or Tilt Reverse, or touch the display where it says
the desired setting.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (normal orientation) or YES (inverted
orientation), or touch the display where it says the desired option.
5. Press <ENTER>.

Display orientation

To set which way the display faces, do the following:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Screen Reverse, or touch the display where it says Screen
Reverse.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (display is normal), YES (display is
inverted), or AUTO (the display automatically detects which way the product is facing and orients
itself accordingly), or touch the display where it says the desired option.
5. Press <ENTER>.

Pan/tilt angle range

To set the range of motion the pan or tilt is permitted:
1. Navigate to the Settings
2. Use <UP> or <DOWN> to select Pan Angle or Tilt Angle, or touch the display where it says the
desired setting.
3. If using the buttons instead of the touchscreen, press <ENTER>.
4. Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 540 (540°), 360 (360°), or 180 (180°) for
pan, and 270 (270°), 180 (180°), or 90 (90°) for tilt, or touch the display where it says the desired
option.
5. Press <ENTER>.
Page 16 of 189
Home Screen
menu.
menu.
menu.
menu.
shows on the display. Press <ENTER>.
WDMX Reset for troubleshooting
Maverick MK2 Spot User Manual Rev. 11
Operation
Menu Map for