Setting The Beep Level - Icom IC-F4200DEX Instructions Manual

Setting the Beep level

■
The beep function can be turned ON or OFF, and its level can be
adjusted between 1 and 5, or 1 (linked) and 5 (linked). When a
Linked option is selected, the beep level is adjustable with [VOL].
Rotate [VOL] to turn OFF the
q
transceiver power.
Set [ROTARY SELECTOR] to
w
any channel other than Chan-
nel 16.
While holding down [Lower], ro-
e
tate [VOL] to turn ON the power
and enter the beep level adjust-
ment mode.
Push [Upper] to change the
r
beep level, or push [Lower] to
turn the beep function ON or
OFF.
• The adjustable range is 1 to 5 or
1 (Linked) to 5 (Linked).
• A beep sounds after pushing
[Upper] or [Lower]. Therefore,
you can determine the current
level setting by the type of beep
that sounds.
Rotate [VOL] to turn the power
t
OFF, then ON again to exit the
beep level adjustment mode.
NOTE: This operation may not
be available, depending on the
presetting. Ask your dealer for
details.
BASIC OPERATION
[ROTARY SELECTOR]
[Upper]
[Lower]
[Upper]
operation
3
[VOL]
[Lower]
operation
5
4
3
2
1
5 (Linked)
4 (Linked)
3 (Linked)
2 (Linked)
1 (Linked)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
22