Setting the microphone gain
■
Adjusts the microphone gain.
Rotate [VOL] to turn the trans-
q
ceiver power OFF.
Set [ROTARY SELECTOR] to
w
Channel 16.
While holding down [Upper], ro-
e
tate [VOL] to turn ON the power
and enter the microphone gain
adjustment mode.
Push [Upper] to increase, or
r
push [Lower] to decrease the
microphone gain.
• The adjustable range is 1 (mini-
mum) to 4 (maximum).
• A beep sounds after pushing
[Upper] or [Lower].
An error beep sounds if you try
to decrease more than 1 or try to increase more than 4.
Therefore, you can determine the current level setting by the type
of beep that sounds.
Rotate [VOL] to turn the power OFF, then ON again to exit the
t
microphone gain adjustment mode.
NOTE:
This operation may not be available, depending on the preset-
ting. Ask your dealer for details.
BASIC OPERATION
[ROTARY SELECTOR]
[Upper]
[Lower]
3
1
2
3
4
[VOL]
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
20
Need help?
Do you have a question about the IC-F4200DEX and is the answer not in the manual?
Questions and answers