Transmitting A Call - Icom IC-F4200DEX Instructions Manual

Transmitting a call

■
dPMR operation allows you to make a call to a specific station (In-
dividual call) or to a particular group (Talkgroup call). Other digital
mode transceivers on the channel will not receive a call that does
not match their individual or talkgroup ID and/or CC.
D Transmitting a Voice call
Rotate [ROTARY SELECTOR], or push one of the memory chan-
q
nel keys, [MR-CH 1] to [MR-CH 4], to select a desired channel,
Individual ID or Talkgroup ID, depending on the presetting.
Push [PTT] or [Call] to make a Voice call.
w
• The LED indicator lights red while transmitting.
• The LED indicator fast blinks orange.
• After an acknowledgement is received, the LED indicator slowly
blinks orange in the Audible mode, or it goes OFF when no ac-
knowledgement is received.
Hold down [PTT], then speak at your normal voice level.
e
• The LED indicator lights red while transmitting.
Release [PTT] to receive.
r
After you finish your communication, push [Clear] to send a 'Dis-
t
connect' signal to terminate the connection.
dPMR OPERATION
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
30