Setting The Beep Function And Level - Icom IC-V10MR Operating Manual

■ Setting the Beep function and level

The beep function can be ON or OFF, and its level can be
adjusted between 1 and 5, or 1 (linked) and 5 (linked). When a
Linked option is selected, the beep level is adjustable by [VOL].
Rotate [VOL] to turn the transceiver power OFF.
q
Set [ROTARY SELECTOR] to any channel other than
w
Channel 16.
While holding down [Lower], rotate [VOL] to turn ON the
e
power and enter the beep level adjustment mode.
Turn the beep function ON or OFF by pushing
r
When a beep sounds after pushing [Lower], the beep
function is ON. When no beep sounds after pushing [Low-
er], the beep function is OFF.
Push [Upper] to change the beep level. Repeatedly push-
t
ing [Upper] first selects 1(lowest) to 5 (highest), and then
selects the lowest linked level, 1(Linked) to the highest, 5
(Linked).
• The adjustable range is 1 to 5 or 1 (Linked) to 5 (Linked).
• If the level is set at 1 to 4, pushing [Upper] increases the level. If the
level is at 5, pushing [Upper] selects the linked levels, starting with
1 (Linked). If the level is at 1 (Linked) to 4 (Linked), pushing [Upper]
increases the level. If the level is at 5 (Linked), pushing [Upper] re-
turns the level to 1. Repeatedly pushing [Upper] repeats the cycle.
• A beep sounds after pushing [Upper]. Therefore, you can de-
termine the current level setting by the increasing loudness of
the beep that sounds.
• To determine if you have selected a linked level, set [VOL] to
minimum, then push [Upper] up to 10 times, listening for the
loudest beep (level 5). Pushing [Upper] once after the loudest
beep will select 1 (Linked). Repeatedly push [Upper] to select
the desired linked level. You can easily hear a level you have set
by repeatedly pushing [Lower].
Rotate [VOL] to turn the power OFF, then ON again to exit
y
the beep level adjustment mode.
NOTE:
[Lower].
This operation may not be
selectable, depending on
the presetting. Ask your
dealer for details.
[ROTARY SELECTOR]
[Upper]
[Lower]
BASIC OPERATION
5
4
3
[Upper]
operation
2
[VOL]
1
5 (Linked)
4 (Linked)
3 (Linked)
2 (Linked)
1 (Linked)
2
1
2
3
4
5
6
7
8
9
10
11
[Lower]
12
operation
13
14
Turn OFF
the Beep
15
function
16
12