To Attach - Icom IC-F4200DEX Instructions Manual

To attach

■
BE SURE to turn OFF the power before attaching.
Attach the connector of the speaker microphone into the multi con-
nector on the transceiver, and tighten the screw.
Turn OFF the power
IMPORTANT: KEEP the connector cover attached to the trans-
ceiver when the speaker microphone is not in use. (p. 4)
Water will not get into the transceiver even if the cover is not at-
tached, however, the terminals (pins) will become rusty, or the
transceiver will function abnormally if the connector becomes
wet.
SPEAKER MICROPHONE
CAUTION: Attach the multi
connector snugly, but do
not overtighten.
A loose connection will al-
low water intrusion into the
connector. A overtightened
connector will damage the
connector pins in the trans-
ceiver.
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
40