D Dtmf Transmission - Icom IC-F4200DEX Instructions Manual

3
BASIC OPERATION
D DTMF transmission
If the transceiver has [DTMF Autodial] assigned to it, the automatic
DTMF transmission function is usable.
Push [DTMF Autodial] to transmit the DTMF code.
➥
D Receiving a Stun, Kill and Revive command
The dispatcher can send a signal that will stun, kill or revive your
transceiver.
When the Stun command is received, a beep sounds*, and the
transceiver becomes unusable. Receiving a Revive command is
necessary to operate the transceiver again in this case.
When the Kill command is received, a beep sounds*, and the trans-
ceiver becomes unusable. Cloning the transceiver is necessary to
operate the transceiver again in this case.
* Depending on the presetting. Ask your dealer for details.
19