Playing A Playlist On Your Home Stereo System - Toshiba Magnia SG20 User Manual

Using your Digital Central Intranet site

Playing a playlist on your home stereo system

To play your playlist on your home stereo system, you need an Ethernet-connected
digital music player. For example, the AudioTron player, or equivalent player, can be used
to deliver .mp3 or .wma music files from your Magnia SG20 to your home stereo system.
Before proceeding to configure your Turtle Beach player to communicate with your SG20
Appliance Server, it is recommended that you familiarize yourself with the components
and features of the system as shown below:
Hard power switch
(located on back of unit)
Soft power switch
AudioTron player that connects Digital Central to your home stereo system
TECHNICAL NOTE: Toshiba has no control over the AudioTron unit. The
configuration process may change at any time. The configuration steps
documented below are accurate at the time of this publication, but may change in
the future.
To connect your AudioTron player to your network:
1 Before connecting the Ethernet cable, connect the power cable to a power source,
again making sure the unit is not yet connected to the SG20 via the Ethernet cable.
After connecting the power cable, press the Hard power switch on the back of the
unit (indicated with a "|" on the switch), and then press the Soft power switch until the
front panel lights come on.
2 Verify the LCD panel reads "Searching for Network" and displays an incremental
counter. This counter may continue for up to 120 seconds before stopping the
search.
3 Turn off DHCP on the unit by first pressing the Options button once. The LCD panel
should read "Select Option" on the first line, and "Check for New Music Files?" on the
second line. Rotate the Navigation and Selection Dial clockwise until the LCD
LCD panel
Option button
Using the digital music jukebox
Navigation and
selection dial
234