Table of Contents
Advertisement
VPN Configuration and Usage
Configuring Network Settings
Once you have a properly installed the VPN adapter, the only remaining network setting
that is required for your client computer to communicate with the Magnia SG20 using
VPN is the workgroup name.
WARNING: Once you complete the setup of your network settings, you will be
required to restart your computer. Be sure to exit all other applications before
proceeding.
To configure your network settings:
1
Open the Windows Start Menu on the Windows Taskbar.
2
Select Settings>Control Panel to display the Windows Control Panel.
3
Double-click the Networking icon.
4
Click the Identification tab.
5
Verify that the computer name displayed is unique for your network. If it is not a
unique name, change it to one that will not be used by any other computer.
6
In the field named Workgroup, type in the word SAWORKGROUP in all upper case
letters to completely replace any text that was there before.
WARNING: If you or your Network Administrator has changed the workgroup on the
Magnia SG20 from the default "SAWORKGROUP", you will need to type the new
workgroup name.
7
Click OK to complete the setup.
Windows will now require you to restart your computer.The Network Properties
dialog box displays.
Dial-Up Networking Phone Book Entry
The Microsoft Windows implementation of Virtual Private Networking is tied to the Dial-
Up Networking feature of the operating system. You must configure a phone book entry
to connect to your Magnia SG20 via VPN.
To create a phone book entry for the Magnia SG20 VPN:
1
On the Windows Desktop, double-click the My Computer icon.
The My Computer window opens.
131
Connecting to the VPN
Hide quick links:
Advertisement
Table of Contents
