Table of Contents
Advertisement
Manually configuring clients using the Windows 95, 98 and Windows Me operating system
4
When the MS-DOS
ping 192.168.1.1 and press Enter.
If the words "Request timed out" or "Bad command or file name" appear in the
window, you must configure your network settings.
5
Click Start, Settings, Control Panel and double-click the Network icon.
The Network Properties dialog box appears.
Installing TCP/IP
If there is no listing for TCP/IP in the box labeled "The following network components are
installed:" continue with these steps to install TCP/IP.
1
Click Add.
2
When the Select Network Component Type dialog box appears, click Protocol in the
box labeled Click the type of network component you want to install: then click Add.
3
In the Manufacturers list, click Microsoft. In the Network Protocols list, click TCP/IP,
then click OK.
TCP/IP should now be included in the list labeled The following network components
are installed: on the Network Properties dialog box.
4
Click OK and follow the prompts.
5
Restart the client computer to complete installation of TCP/IP.
6
Click Start, Settings, Control Panel and double-click the Network icon.
The Network Properties dialog box appears.
7
Click the Identification tab. If the Workgroup box does not contain the word
"SAWORKGROUP," your network settings must be configured.
Configuring network settings
1
Click Start, Settings, Control Panel and double-click the Network icon.
The Network Properties dialog box appears.
2
Click the Configuration tab.
3
In the list labeled The following network components are installed: click the TCP/IP
item that is associated with the network adapter card you wish to use for connecting
to the Magnia SG20, then click Properties.
®
Prompt window opens, type:
290
Hide quick links:
Advertisement
Table of Contents
