Table of Contents
Advertisement
Manually configuring clients with Windows NT 4.0, Windows 2000 and Windows XP operating systems
3
Follow the prompts and accept all defaults.
4
Restart the client computer to complete installation of TCP/IP.
Determining if configuration is required
1
Click Start, Settings, Control Panel and double-click the Network icon.
The Network Properties dialog box appears.
2
Click the Identification tab.
3
If the Workgroup box does not contain the word "SAWORKGROUP," your network
settings must be configured.
Configuring your network settings
1
Click Start, Settings, Control Panel, and double-click the Network icon.
The Network Properties dialog box appears.
2
Click the Protocols tab.
3
In the Network Protocols list, select TCP/IP Protocol, then click Properties.
4
When the TCP/IP Properties dialog box appears, click the IP Address tab.
5
From the drop-down Adapter list, select the adapter that you wish to use for
connecting to the Magnia SG20.
NOTE: If Specify IP Address is selected, and you have numbers in the IP Address
box or the Subnet Mask box, write them down now.
6
Select the option Obtain an IP Address Automatically.
7
Click OK to close the TCP/IP Properties dialog box.
8
Click the Identification tab.
9
Verify that the computer name displayed is unique for your network.
10
If it is not a unique name, click Change and change it to one that will not be used by
any other computer.
NOTE: Write down the existing Domain or Workgroup name.
299
Hide quick links:
Advertisement
Table of Contents
