Toshiba Magnia SG20 User Manual page 82

Establishing an Internet Connection
❖
Subnet mask
❖
Primary DNS Server
❖
Secondary DNS Server (optional)
❖
Default gateway (optional)
❖
The Magnia SG20 establishes a default computer name to be used with the public
Ethernet port. Some cable ISPs require that you assign your computer a name that
they specify. If your ISP does this, you will need the specific computer name in
addition to the static IP information indicated above.
To configure your system for cable-based access to the Internet:
1 Connect your cable modem to the public Ethernet port at the back of the Magnia
SG20 using a standard Ethernet (CAT5) cable.
2 From a client computer, click the Admin icon to start the Administration Web site.
Select the Network tab.
A screen describing your current configuration appears.
3 Click the Configure hyperlink next to the Internet Connection section.
This takes you to the screen where you can select the type of Internet connection to
use.
Sample Cable connection configuration screen
Connecting the Magnia SG20 to the Internet
82