You Will Also Need; Finding Your Way Around; Front Of The Magnia Sg20 - Toshiba Magnia SG20 User Manual

Getting Started
2 Write the Magnia SG20 serial and part numbers on the convenient peel-off label
located on the Quick Start card.
3 Peel off the label and apply it to the side or base of the Magnia SG20. Avoid covering
any ventilation holes.
For a detailed description of each component, see

You will also need

❖
Network cables or wireless devices for connecting client computers to the Magnia
SG20, and for connecting the Magnia SG20 to the Internet
❖
Printer cable if connecting a printer to the parallel printer port

Finding your way around

This section explains the physical connections and screen displays of the Magnia SG20.

Front of the Magnia SG20

LCD display
Status scroll button
Power/Shutdown button
Locating the LCD display, status and power buttons
❖
The LCD display indicates that the Magnia SG20 is on, provides access to the public
and private network IP addresses, and displays warnings if any of the hardware is at
the point of failure.
You can configure the display to provide information about the status of your Magnia
SG20 such as: modem status, the date and time the last backup was performed, the
availability of software upgrades, and so on.
❖
The Status scroll button allows you to scroll through the information displayed on
the LCD display.
❖
The Power/Shutdown button turns the Magnia SG20 on and off. When you turn off
the Magnia SG20, a message prompts you to press the button again as confirmation.
Finding your way around
24
You will also need
on page 24.