Connecting To An Existing Corporate Network - Toshiba Magnia SG20 User Manual

Toshiba magnia
Hide thumbs Also See for Magnia SG20:
Table of Contents

Advertisement

Setting Up Your Local Area Network
The green bullet to the left of each item indicates that the appliance is operating without a
problem. If a problem is detected, the bullet will turn yellow. Click each item for further
information.
Two types of hard disk drive information are monitored. SMART drive status is an internal
drive feature that allows the drive to monitor itself and predict if a problem will occur. Total
available hard drive space is reported.
Fans are also monitored for health. If a fan fails or begins to run too slowly, the health
monitor reports this.
The internal temperature of the Magnia SG20 is monitored at two different locations. If
the temperature exceeds the normal limit, the health monitoring screen will indicate this.
The LCD panel will also indicate this problem.
NOTE: High internal temperatures in the Magnia SG20 can usually be corrected by
ensuring the unit is in a well-ventilated area and the fan openings are not blocked.
Internal voltages are monitored to assure sufficient power supply. If the voltage exceeds
normal limits, it will be indicated here.

Connecting to an existing corporate network

Instead of connecting the Magnia SG20 to the Internet, you can connect it to another
local network. This is useful if the other network has Internet access, or if you need to
transfer files between the Magnia SG20 and the corporate LAN.
Using a suitable cable, connect the corporate LAN to the Magnia SG20's public Ethernet
port.
Connect the corporate LAN to this port
Locating the Ethernet ports on the Magnia SG20
NOTE: Do not connect the LAN to any of the private ports. This action may affect
LAN performance. Use only the "public" port for LAN connection.
Configure the Magnia SG20 to the corporate LAN option. If you do this when setting the
server up for the first time, you can select this option through the Server Setup Wizard.
If you have already set up your system, use the Administration Web site to configure the
Magnia SG20.
Connecting to an existing corporate network
75

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents