Viewing Log Information - Toshiba Magnia SG20 User Manual

Home Automation Interface
The heating and air conditioning interface provided on Digital Central act similar to the
actual thermostat in your home. The main difference is that if you have multiple
thermostats, you need to select which thermostat you wish to remotely control via the
drop down list on the main heating and air screen.
❖
To get to the heat and air screen, click the Heating/Air link in Home Automation.
❖
In the upper left hand corner of this main page, you can select which thermostat to
control. If you have only one thermostat installed, then it should be the only one listed.
Please see your thermostat manual for detailed instructions since the buttons and
commands provided on Digital Central should act identically to the actual buttons
provided on the thermostat itself.

Viewing Log Information

A log of the last 30 commands sent through your home automation controller, whether
from Digital Central or the interface provided with the home automation controller unit
itself (for example, keypads, other software, and so on). This log is provided for auditing
purposes so that you know exactly what actions and/or commands are being processed
by your home controller.
Viewing Log Information
271