Sending Volume - Yealink SIP-T2 Series Administrator's Manual

Sending Volume

Sending volume allows user to adjust the sending volume of currently engaged audio devices
(handset, speakerphone or headset) when the phone is in use.
Procedure
Sending volume can be configured using the following methods.
Central Provisioning
(Configuration File)
Web User Interface
Details of the Configuration Parameters:
Parameters
voice.handfree_send
Description:
Configures the sending volume of the speaker.
Note: We recommend that you modify this parameter cautiously. An unreasonable value
may render the voice quality bad. If you change this parameter, the IP phone will reboot to
make the change take effect.
Web User Interface:
Features->Audio->Handfree Send Volume (-50~50)
<y0000000000xx>.cfg
Permitted Values
Integer from -50 to 50
Configuring Audio Features
Configure the sending volume of the
speaker.
Parameter:
voice.handfree_send
Configure the sending volume of the
handset.
Parameter:
voice.handset_send
Configure the sending volume of the
headset.
Parameter:
voice.headset_send
Configure the sending volume of the
speaker/handset/headset.
Navigate to:
http://<phoneIPAddress>/servlet?p=f
eatures-audio&q=load
Default
0
839