Table of Contents
Advertisement
Overview
This chapter provides a description of the AMI BIOS. The BIOS setup menus and
available selections may vary from those of your product. For specific information on
the BIOS for your product, please contact us.
NOTE: The BIOS menus and selections for your product may vary from
those in this chapter. For the BIOS manual specific to your product, please
contact us.
AMI's ROM BIOS provides a built-in Setup program, which allows the user to modify
the basic system configuration and hardware parameters. The modified data will be
stored in a battery-backed CMOS, so that data will be retained even when the power
is turned off. In general, the information saved in the CMOS R AM will not need to
be changed unless there is a configuration change in the system, such as a hard
drive replacement or when a device is added.
It is possible for the CMOS battery to fail, which will cause data loss in the CMOS
only. If this happens you will need to reconfigure your BIOS settings.
QDSP-300 User's Manual
Chapter 3
AMI BIOS Setup
Chapter 3
Advertisement
Table of Contents
Need help?
Do you have a question about the QDSP-300 and is the answer not in the manual?
Questions and answers