Enabling/Disabling Silent Dialling - Videx 4000 Series Technical Manual

1111TBA"HHMMHHMM"?
1111TBA?
1111TBA""
1111TBA""?

ENABLING/DISABLING SILENT DIALLING

When the intercom is calling the telephone number there is a choice of either hearing the
ringing noise from the intercom or just hearing beeps to indicate calling.
Ringing heard during calling: nn = 01
Beeps heard during calling: nn = 00
1111AUEnn
1111AUEnn?
1111AUE?
SEND DTMF TONE AFTER CALL IS ANSWERED (BUTTON 1)
It is possible to set the GSM to send a DTMF tone after a call is answered. This option is
available for both the primary number of button 1 and the divert number for button 1. This
feature is disabled as default.
To program button 1 primary call:-
1111DTPn
To program the button 1 divert call:-
1111DTDn
To program the delay time from when the call is answered to when the tone is sent:-
1111DTTnn
To query the settings:-
1111DTP?
1111DTD?
1111DTT?
PAGE 23 of 40
As above but also reply with a SMS text back to the
sender with the stored setting.
Query setting, A text message will be sent to the sender
with the stored time window.
Delete the time band and allow calls to be received at
any time.
Delete and confirm deletion of the time band.
Store the mode nn = 00 or 01.
Store the mode nn = 00 or 01. Also send a confirmation
text back to the sender.
Query the current stored mode. A text message will be
sent to the sender showing the stored mode.
n = 0 -9 for DTMF tones 0-9 or X to disable
Add a ? to the end of the string to receive a confirmation
n = 0 -9 for DTMF tones 0-9 or X to disable
Add a ? to the end of the string to receive a confirmation
nn = 01 - 12 Seconds
Add a ? to the end of the string to receive a confirmation
Replies TP=n
Replies TD=n
Replies TT=nn
GSM DOOR INTERCOM TECHNICAL MANUAL VER 2.0.8