Paddle Board; Removing The Paddle Board - Dell SD7000-S Owner's Manual

Next steps
1. Install the system cover.
2. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
After working inside your system

Paddle board

Removing the paddle board

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Follow the safety guidelines listed in Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the server sled.
Steps
1. Disconnect all cables from the paddle board.
2. Remove the two screws on the paddle board and lift it away from the server sled.
Figure 37. Removing and installing the paddle board.
1. screw hole (7)
94
2. paddle board