Disabling A Forgotten Password - Dell SD7000-S Owner's Manual

Item Connector
7 CPU2
8 B3, B4
9 PWR_CONN_C(P3)
11 INTRUSION
12 A1, A5, A2, A6
13 Board Handle
14 CPU1
15 PWR_CONN_B(P2)
16 A3, A7, A4, A8
17 SW_RAID_B
18 BP_SIG
19 BP3
20 SYS_PWR_CONN (P1)
21 FP_USB
22 SATA_HDD
23 PIB_CONN
24 SATA_HDD
25 CTRL_PNL
26 SW_RAID_A
27 INT_USB_3.0
28 TPM_MODULE
29 J_PSWD_NVRAM

Disabling a forgotten password

The software security features of the system include a system password and a setup password. The
password jumper enables these password features or disables them and clears any password(s) currently
in use.
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Description
Processor socket 2
Memory module socket
8-pin power connector
Intrusion switch connector
Memory module socket
Used to assist pull out the system board for
replacement/service
Processor socket 1
8-pin power connector
Memory module socket
Software RAID connector B (reserved)
Backplane signal connector (reserved)
Hard drive backplane power connector
24-pin power connector
Front-panel USB connector (reserved)
SATA boot drive B
Hot/cool-interposer board connector
SATA boot drive A
Control panel interface connector (reserved)
Software RAID connector A
Internal USB connector
Trusted platform module connector
For more information, see System board jumper
settings.
111