Dell SD7000-S Owner's Manual page 90

Figure 32. Replacing the system battery
1. positive side of the battery connector
3. negative side of the battery connector
3. To install a new system battery, hold the battery with the positive facing up and slide it under the
securing tabs.
4. Press the battery into the connector until it snaps into place.
Figure 33. Installing the system battery
1. system battery
Next steps
1. Install the expansion-card riser module.
2. Install the server sled.
3. Follow the procedure listed in the After working inside your system section.
4. While booting, press F2 to start the System Setup and ensure the battery is operating properly.
5. Enter the correct time and date in the System Setup Time and Date fields.
6. Exit the System Setup.
Related Links
Before working inside your system
After working inside your system
90
2. system battery
2. positive side of the battery connector