Server Sleds; Removing The Server Sled - Dell SD7000-S Owner's Manual

Server sleds

Removing the server sled

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Follow the safety guidelines listed in safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
CAUTION: Never operate your system with the cooling shroud removed. The system may get
overheated quickly, resulting in shutdown of the system and loss of data.
CAUTION: The replacement service time for server sleds when the system is operating is two
minutes.
Steps
1. Loosen the two screws locking the server sled.
2. Pull the lever outward to release the server sled.
3. Pull the server sled sway from the system.
Figure 8. Removing and installing the server sled
1. lever (2)
3. server sled
52
2. screw (2)