Dell SD7000-S Owner's Manual page 101

4. Remove or disconnect the following components:
a. cooling shroud
b. memory modules
c. sled cables
d. expansion cards
e. riser card
f. expansion-card riser module
g. heat sink and processor
Steps
1. Disconnect all other cables from the system board.
Figure 42. Cabling diagram
1. mini SAS HDD connector
3. server sleds
5. hard drive
7. system board
2. 60-pin FBBI cable connector
4. FBBI cable connector
6. SATA 7P cable connector
8. 18-pin power cable and 4-pin power
cable connector
101