Installing The System Cover - Dell SD7000-S Owner's Manual

Figure 7. Removing and installing the system cover
1. release latch 1 (2)
3. system cover
5. screw guide

Installing the system cover

Prerequisites
Follow the safety guidelines listed in safety instructions section.
Steps
1. Align the slots of the system cover with the tabs on the chassis.
2. Slide back the four release latches until they locks into place.
3. Tighten the screw to secure the system cover.
Next steps
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
After working inside your system
2. release latch 2 (2)
4. screw
51