Dell SD7000-S Owner's Manual page 96

5. Remove all hard drives.
6. Remove all system fans and the fan cage.
7. Remove all PSUs.
8. Remove all server sleds.
9. Remove all expander boards.
10. Disconnect all cables from the backplane.
Figure 38. Cabling diagram for the backplane
1. hard drive backplane
3. SAS_C and SAS_D connectors on the
backplane
5. mini-SAS HD cable (2)
7. SAS_C and SAS_D connectors on the
interposer board
11. Remove the interposer board.
96
2. SAS_A and SAS_B connectors on the
backplane
4. interposer board
6. SAS_A and SAS_B connectors on the
interposer board