Removing A 3.5-Inch Hard Drive From An Hard Drive Carrier; Installing A 3.5-Inch Hard Drive Into An Hard Drive Carrier - Dell SD7000-S Owner's Manual

3. Press the release button on the front of the hard drive carrier and open the hard drive carrier handle.
4. Insert the hard drive carrier into the hard drive slot until the carrier comes in contact with the
backplane.
5. Close the hard drive carrier handle to lock the hard drive in place.

Removing a 3.5-inch hard drive from an hard drive carrier

Prerequisites
1. Keep the #2 Phillips screwdriver ready.
2. Remove the HDD carrier from the system.
Steps
1. Remove the screws from the slide rails on the HDD carrier.
2. Lift the HDD out of the HDD carrier.
Figure 24. Removing a 3.5-inch hard drive from an hard drive carrier and installing a 3.5-inch hard drive
into an hard drive carrier
1. screw (4)
3. hard drive carrier

Installing a 3.5-inch hard drive into an hard drive carrier

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
78
2. 3.5-inch hard drive