Hard Drive Indicator Codes - Dell SD7000-S Owner's Manual

Item Indicator, button, or
connector
10 Power button
11 Boot hard drive A
12 Boot hard drive B
13 Power supply units
14 PSU Handle

Hard drive indicator codes

Figure 3. 2.5-inch hard drive indicator
1. hard drive activity indicator
3. hard drive
NOTE: If the hard drive is in Advanced Host Controller Interface (AHCI) mode, the status indicator
(on the right side) does not function and remains off.
NOTE: The function of the status indicator may vary depending on the hard drive type.
Icon Description
The power button controls the PSU output to the
system.
NOTE: On ACPI-compliant OSs, turning off
the system using the power button causes the
system to perform a graceful shutdown
before power to the system is turned off.
2.5–inch boot hard drive
2.5–inch boot hard drive
Four redundant power supply units (PSUs).
From left to right: PSUs 1 and 2 are for sled B
(upper sled); PSUs 3 and 4 are for sled A (lower
sled).
Holds expander board bracket in the chassis
2. hard drive status indicator
11