Dell SD7000-S Owner's Manual page 33

System Information
You can use the System Information screen to view system properties such as Service Tag, system model
name, and the BIOS version.
Viewing System Information
To view the System Information screen, perform the following steps:
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish
booting, and then restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click System Information.
System Information details
The System Information screen details are explained as follows:
Option Description
System Model Specifies the system model name.
Name
System BIOS Specifies the BIOS version installed on the system.
Version
System Specifies the current version of the Management Engine firmware.
Management
Engine Version
System Service Specifies the system Service Tag.
Tag
System Specifies the name of the system manufacturer.
Manufacturer
System Specifies the contact information of the system manufacturer.
Manufacturer
Contact
Information
System CPLD Specifies the current version of the system complex programmable logic device
Version (CPLD) firmware.
UEFI Compliance Specifies the UEFI compliance level of the system firmware.
Version
33