Nd Card Reader - Ingenico IWL220 Technical Manual

It can detect cards presence and resist to IK04 impact.
Feature
Conformity with ISO
standard
Protocol handled
Clock frequency
Protection
Programming voltage Vpp
Grip
Synchronous cards
Power supply voltage
Read head lifespan
nd
2.3.6.2. 2 card reader
On the iWL2xx the second card reader is an optional
device. It is located at the rear side of the terminal.
The card is hidden under a removable trapdoor.
Featu
Conformity with ISO
standard
Cards format
Synchronous cards
Read head lifespan
Technical manual _iWL220/250
ICO_MKP_009_GU_EN_V4
Description
- ISO/IEC 7816-1, 2, 3 standard
- EMV specifications
Synchronous and Asynchronous T=0 & T= 1
4,76MHz (double choice by SW, with PPS management)
Detection of short-circuit or over-consumption
Detection of accidental removal
Not connected
8 friction contacts (middle chip)
Contact for card presence and removal
Separate logical outputs on contacts 4 and 8
Possibility of specific drivers development on request.
Vcc 5V or 3V or 1.8V (transition by software)
300 000 cycles
Description
ISO7816-2
ID1 format
Don't manage 4 and 8 contacts
Resist to foreign object insertion IP30
Resist to card insertion in a wrong way
Up to 5000 card operations (insertion /withdrawal)
20/60
Copyright © 2010 Ingenico
All rights reserved