Ethernet - Ingenico IWL220 Technical Manual

Line differential security: 250V non-destructive
Insulation Galvanic isolation between line interface and modem: 2.500
volts/1min
Logical AT-compatible command set
Plug-in cable, length 3m, fitted with RJ11 at both ends
Cable Connection to network by RJ11 socket + T/RJ11 adapter if
necessary
3.2.5.

Ethernet

Characteristics Ethernet
Electronic interface IEEE 802.3
RX+ RX-
Number of wires
TX+ TX-
Modular jack 8 points RJ 45
Mechanical interface
Standard interface
10 Mbps and 100 Mbps compatible
Logical interface
Full duplex
Speeds 100 MHz
- IPv4
- FTP SSLv3 (Open SSL layer embedded. Security profiles
management. Single / dual authentication possible.
Protocol
Conforms to Mastercard PTS program)
SNMP
SMTP
Connections examples LAN
Technical manual _iWL220/250
ICO_MKP_009_GU_EN_V4
35/60
Copyright © 2010 Ingenico
All rights reserved