Regency CV40E-NG Owners & Installation Manual page 32

installation
14. Install the two middle side panels—tighten the screws for these panels
from the inside of the framing. (See Step 9 for details)
Right side panel facing unit
NOTE: Before installing the front top panel—mark and drill the screw
holes for the TV bracket in the middle front panel while the studs are still
visible refer to TV mounting instructions.
Preplan and measure the position of the bracket carefully, the TV must
be a minimum of 9 inches from the top lip of the appliance.
15. Install the TV mounting bracket to the middle panel.
16. Install the front top panel and tighten the screws from inside the
framing unit.
Front top panel
32 | City Series
17. Install the top side panels, these panels do not allow for the screws
to be tightened once installed. If these panels require adjusting—
pre-tighten the screws before hanging the panels to obtain desired
position of the panels.
18. Secure TV trim ring with 2 screws—see below.
Top side panels
Completed TV panel kit