Arctic Cat ATV 250 Utility 2009 Service Manual page 44

3. Release the spring pressure and remove the cen-
trifugal clutch assembly from the driven pulley.
4. Remove the spring and spring seat; then remove
the hub collar.
5. Remove four pins and bushings from the fixed
face hub; then remove the movable face.
Back
KM373
KM375
KM385
KM384
Back to TOC
Inspecting
1. Inspect the pulley faces for wear, galling, or
grooving.
2. Inspect the O-rings on the movable face for nicks,
tears, or swelling.
3. Inspect two grease seals in the movable face for
nicks, cuts, or damage.
Back to Section TOC
KM380
3
KM394A
KM380A
Next
3-21