Chapter 4. Configuration
Startup Delay Time for Produced Exchanges (ms): Corresponds to the gp_phase AUP parameter.
Stale Consumed Exchanges: Corresponds to the gnostale AUP parameter.
TTL for Unicast Messages: Corresponds to the gucast_ttl AUP parameter.
CPE330/CPE400 Settings Tab
Figure 16: CPE330/CPE400 settings tab
CPE330 LAN1:
TTL for Multicast Messages: Corresponds to the gmcast_ttl AUP parameter.
IP Address for Multicast Group X: Corresponds to the gXX_addr AUP parameters. XX identifies group (1 – 32).
CPE330 LAN2:
TTL for Multicast Messages: Corresponds to the gmcast_ttl2 AUP parameter.
IP Address for Multicast Group X: Corresponds to the gXX_addr2 AUP parameters. XX identifies group (1 – 32).
GFK-2224Q
January 2017
39