GE RX3i User Manual page 238

Pacsystems
Hide thumbs Also See for RX3i:
Table of Contents

Advertisement

Error Status (Hex)
SRTP Error Code Description
3611H
The mailbox offset specified is invalid.
3711H
The backplane task could not be registered because the message response handler
was not specified.
3811H
The backplane task could not be registered because the unsolicited mailbox message
handler was not specified.
3911H
The backplane task could not be registered because a required parameter was not
specified.
3A11H
More than the allowable byte length in a single transfer.
3B11H
Bad sequence number in the request.
3C11H
Invalid command in request.
3D11H
Response length does not match length specified in the response qualifier.
3E11H
Request failed because the PLC's Service Request Processor is not initialized.
3F11H
Request failed due to an error in the remote device, most likely running out of Dual-
Port RAM text buffers.
4011H
Unable to free dual port memory that was allocated for a connection or block transfer
area.
4111H
The backplane task could not be registered because the service request handler was
not specified.
4211H
No dual port memory was allocated for the connection or block transfer area needed
to process the request.
4311H
Failure to register with backplane driver because the requested task is already
registered.
4411H
Request failed because an invalid field was identified in the request mailbox qualifier.
E811H
Unable to send request to the PLC because an internal message queue is full.
E911H
Unable to send request to the PLC because the text buffer type is invalid.
EA11H
Unable to send request to the PLC because the mailbox utility function is invalid.
EB11H
Unable to send request to the PLC because the mailbox message is not specified.
EC11H
Unable to send request to the PLC because the internal message queue is not
initialized.
FE11H
Request failed due to mailbox error on remote device. The remote device log will have
more information.
2911H
The backplane driver is not initialized.
2A11H
The backplane driver could not access the PLC.
2F11H
Request failed due to an invalid parameter detected in the remote device. The remote
device log will have more information.
3011H
The specified task is not registered.
3111H
Failure to register with backplane driver because the requested task is already
registered.
3211H
Unable to find resource necessary for backplane driver to process a service request.
3311H
Bad sequence number detected in the service request because it is already in use.
3411H
Invalid data detected that prevents backplane driver from completing a request.
3611H
More than the allowable byte length in a single transfer.
4811H
Memory resource problem detected.
4911H
Network buffer resource problem detected.
4C11H
Error detected while attempting to receive mailbox messages from the PLC.
4D11H
Timed out waiting to obtain a backplane transfer buffer.
GFK-2224Q
January 2017
Chapter 12. Diagnostics
225

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx7i

Table of Contents