Eok Led Blink Codes For Hardware Failures (Rack-Based And Rx7I Embedded Interfaces) - GE RX3i User Manual

Pacsystems
Hide thumbs Also See for RX3i:
Table of Contents

Advertisement

On the RX7i interfaces, the Ethernet LEDs are labeled EOK, LAN, and STAT.
On the RX3i rack-based Ethernet interfaces, the Ethernet LEDs are labeled ETHERNET OK, LAN OK, and LOG
EMPTY, respectively.
12.4 EOK LED Blink Codes for Hardware Failures (Rack-based and
RX7i Embedded Interfaces)
The EOK LED indicates whether the module is able to perform normal operation. This LED is on for normal
operation and flashing for all other operations. If a hardware or unrecoverable runtime failure occurs, the EOK
LED blinks a two-digit error code. The EOK LED first blinks to indicate the most significant error digit, then after
a brief pause blinks again to indicate the least significant error digit. After a long pause the error code display
repeats
Blink
Description
Code
0x12
Undefined or Unexpected Interrupt.
0x13
Timer failure during power up diagnostics. 0x51
0x14
DMA failure during power up diagnostics.
0x21
RAM failure during power up diagnostics.
0x22
Stack error during power up diagnostics.
Shared Memory Interface error during
0x23
power up diagnostics.
Firmware CRC (cyclic redundancy check)
0x24
error during power up or Factory Test
0x25
Run time exception
No mail communication available during
0x26
software load
0x27
Serial EEPROM access exception
0x28
Serial EEPROM reset exception
0x31
Machine check exception
0x32
Data store exception.
0x33
Instruction store exception
0x34
Alignment exception
0x35
Program exception
0x36
System call exception
0x37
Unexpected IRQ exception
0x38
Data cache TLB miss exception
CRC error or software error during normal operation causes Ethernet restart
22
GFK-2224Q
Blink Code Description
0x42
Firmware Loader error
Unexpected watchdog timer exception
0x52
Unexpected debug exception
0x61
Boot: Critical interrupt exception
0x62
Boot: Machine check exception
0x63
Boot: Data store exception
0x64
Boot: Instruction store exception
22
0x65
Boot: External interrupt exception
0x66
Boot: Alignment exception
0x67
Boot: Program exception
0x68
Boot: System call exception
0x69
Boot: PIT interrupt exception
0x71
Boot: FIT interrupt exception
0x72
Boot: WDT interrupt exception
0x73
Boot: Data cache TLB miss exception
Boot: Instruction cache TLB miss
0x74
exception
0x75
Boot: Debug exception
0x76
Boot: Flash memory CRC error
0x77
Boot: Unexpected ACFAIL interrupt
January 2017
Chapter 12. Diagnostics
211

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx7i

Table of Contents