GE RX3i User Manual page 236

Error Status (Hexadecimal)
Remote
Client
Server
8F05H 8F85H
8E05H 8E85H
9005H 9085H
9305H 9385H
C105H C185H
C305H C385H
C605H C685H
C705H C785H
C805H C885H
C905H C985H
CA05H CA85H
CB05H CB85H
CC05H CC85H
CD05H CD85H
CE05H CE85H
CF05H CF85H
D105H D185H
D205H D285H
D505H D585H
D605H D685H
D705H D785H
D805H D885H
D905H D985H
DA05H DA85H
DB05H DB85H
DC05H DC85H
DD05H DD85H
DE05H DE85H
DF05H DF85H
E005H E085H
E405H E485H
E905H E985H
EA05H EA85H
EE05H EE85H
EF05H EF85H
F005H F085H
F105H F185H
F205H F285H
F405H F485H
F505H F585H
F605H F685H
F705H F785H
F805H F885H
F905H F985H
GFK-2224Q
Minor Error Code Description
Session already exists.
Memory write is prohibited.
Invalid PLC memory reference range.
Text buffer length/count does not agree with request parameters.
Invalid block state transition.
Text length does not match traffic type.
Control Program (CP) tasks exist but requestor not logged into main CP.
Passwords are set to inactive and cannot be enabled or disabled.
Password(s) already enabled and cannot be forced inactive.
Login using non-zero buffer size required for block commands.
Device is write-protected.
A comm or write verify error occurred during save or restore.
Data stored on device has been corrupted and is no longer reliable.
Attempt was made to read a device but no data has been stored on it.
Specified device has insufficient memory to handle request.
Specified device is not available in the system (not present).
Packet size or total program size does not match input.
Invalid write mode parameter.
Invalid block name specified.
Total datagram connection memory exceeded.
Invalid datagram type specified.
Point length not allowed.
Transfer type invalid for this Memory Type selector.
Null pointer to data in Memory Type selector.
Invalid Memory Type selector in datagram.
Unable to find connection address.
Unable to locate given datagram connection ID.
Size of datagram connection invalid.
Invalid datagram connection address.
Service in process cannot login.
Memory Type for this selector does not exist.
Memory Type selector not valid in context.
Not logged in to process service request.
Could not return block sizes.
Programmer is already attached.
Request only valid in stop mode.
Request only valid from programmer.
Invalid program cannot log in.
Invalid input parameter in request.
Invalid password.
Invalid sweep state to set.
Required to log in to a task for service.
Invalid program name referenced.
Task address out of range.
January 2017
Chapter 12. Diagnostics
223