GE RX3i User Manual page 270

Network Interface Parameters (task l)
lduplex0 Ethernet duplex for Controller
0=auto-detect, 1 = half, 2= full)
lduplex1a Ethernet duplex for Port 1A
26
(0=auto-detect, 1=half, 2=full)
lduplex1b Ethernet duplex for Port 1B
(0=auto-detect, 1=half, 2=full)
lspeed0 Ethernet speed for Controller
(0=auto-detect, 1=10Mbit, 2=100Mbit)
lspeed1a Ethernet speed for Port 1A
26
(0=auto-detect, 1=10Mbit, 2=100Mbit)
lspeed1b Ethernet speed for Port 1B
(0=auto-detect, 1=10Mbit, 2=100Mbit)
Modbus TCP/IP Server Parameters (task m)
Note: SNTP is supported on the embedded Ethernet interfaces of the CPE305/CPE310/CPE330 and CPE400 ONLY
GFK-2224Q
Appendix A. Configuring Advanced User Parameters
when configured using PME!
January 2017
Default Range
0 0,1,2
0 0,1,2
0 0,1,2
0 0,1,2
0 0,1,2
0 0,1,2
None None
257