Installing The Aileron Servos - Seagull Models JU-87 STUKA Assembly Manual

4) Slide the wing panel into position,
guiding the extensions from the side
wing into center wing.

INSTALLING THE AILERON SERVOS.

Because the size of servos differ, you
may need to adjust the size of the precut
opening in the mount. The notch in the
sides of the mount allow the servo lead to
pass through.
1) Using a small weight (Weighted fuel
pick-up works well) and string, feed the
string through the wing as indicated.
2) Place the servo between the mounting
blocks and space it from the hatch. Use a
pencil to mark the mounting hole loca-
tions on the blocks.
7