Seagull Models JU-87 STUKA Assembly Manual page 22

JU-87
4) Attach the motor to the front of the
electric motor box using four 4mm blind
nut, four M5x20mm hex head bolts to se-
cure the motor. Please see picture shown.
22
M5x25mm
Blind nut.
6.5mm
Instruction Manual.
170mm
5) Attach the speed control to the side
of the motor box using two-sided tape
and tie wraps. Connect the appropriate
leads from the speed control to the mo-
tor. Make sure the leads will not interfere
with the operation of the motor.
M5x20mm