Feature Expander Type 500 40M - Aficio 5000L Service Manual

November 29, 1999

3.4.3 FEATURE EXPANDER TYPE 500 40M

1. Remove the top cover [A] (2 screws) and
right cover [B] (4 screws).
2. Remove the operation panel [C] (2 screws)
as shown.
3. Attach the bracket [D] (1 screw) to the
interface board [E] as shown. (The feature
expander is attached to this board.)
NOTE: Be sure to only tighten the screw
temporarily at this moment.
INSTALLING OPTIONAL UNITS
[C]
[D]
3-7
[A]
[B]
H130I501.WMF
H130I502.WMF
[E]
H130I503.WMF