Nicf Program Download (Ic Card To Machine) - Aficio 5000L Service Manual

DATA AND FIRMWARE DOWNLOAD/UPLOAD

6.9.8 NICF PROGRAM DOWNLOAD (IC CARD TO MACHINE)

This updates the NICF program in the machine (downloads it from an IC card).
1. After turning off the main power, insert the IC card containing the NICF
program into the IC card slot on the front of the machine (left side).
NOTE: The FCU switch must be off.
2. Turn on the power and select "8. NICF ROM" and press START.
NOTE: The LCD display should be "FLASH ROM → MACHINE".
3. If "OK" is displayed, exit the function and turn the power off.
If "NG!!" is displayed, repeat from step 2.
4. Remove the IC card, insert the function upgrade card or FOD card (if it was
installed), and replace the cover.
5. After turning the power back on, print out the system parameter list
and check that the program has been successfully downloaded.
6-44
November 29, 1999