Ncu Parameters (Function 08); Modem Test (Function 08) - Aficio 5000L Service Manual

November 29, 1999

4.1.9 NCU PARAMETERS (FUNCTION 08)

ë
1. î
then immediately
within 3 seconds
í å
2.
í
3.
4. Scroll through the parameters using
V or E. If you want to change a value,
enter the new value at the keypad,
then press #.
5. To finish : # î.
NOTE: Parameter CC is the Country Code, Parameter 01 is the Tx level.
NOTE: If you change the NCU country code and exit the service mode, the bit
switch country code (System Bit Switch 0F) will automatically be
changed to the code for the same country as the new NCU code.
The bit switch settings also automatically return to the defaults for that
country, including bit switches related to optional units. Therefore, for
example, if 40MB memory is installed, any data remaining in the
memory will be lost.

4.1.10 MODEM TEST (FUNCTION 08)

ë
1. î
then immediately
within 3 seconds
í å
2.
ì
3.
4. Scroll through the available tests using
V or E .
5. To start a test: 4
6. To stop the test: T
7. To finish: # î
ì ä ä å
4
ì ä ä å
4
4-5
SERVICE LEVEL FUNCTIONS
H306M501.BMP
H306M518.BMP
H306M519.BMP
H306M501.BMP
H306M518.BMP
H306M520.BMP