Table of Contents
Advertisement
November 29, 1999
6.10.7 REPLACING THE UPPER LIMIT AND PAPER END
SENSORS
[A]
[C]
1. Remove the paper feed tray (2 screws). (See section 6.10.1.)
2. Remove the connectors attached to the upper limit sensor [A] and paper end
sensor [B].
3. Remove the screw that holds the sensor bracket [C] in place, and remove the
bracket by pulling downward.
4. Remove the sensors from the bracket.
[B]
6-49
OPTIONAL PAPER FEED UNIT
H306R914.WMF
Advertisement
Table of Contents
