Status Indicator; Image Rotation And Paper Selection - Aficio 5000L Service Manual

November 29, 1999

2.5.3 STATUS INDICATOR

There are two indicators on the front edge of the operation panel. They show the
machine's status. The following table describes their function, along with four other
indicators on the operation panel.
ADF/Paper Feed
Error, Cover open,
Tx error, Network
error, SC
Toner near-end
Toner end
Paper near end
No Paper
Communicating
Printing as Printer

2.5.4 IMAGE ROTATION AND PAPER SELECTION

When the Image Rotation is enabled (user switch), all incoming documents go into
the SAF memory first and will then be printed on the correct size of paper.
The paper size that the machine declares in the T.30 protocol depends on the
paper size dial settings, as shown in the following table.
Declaration
in T.30
Either: A3, A4(LEF), DLT or LT(LEF) paper is loaded.
A3
Or: A3, A4(LEF), DLT or LT(LEF) paper is selected with the paper size
dial but there is no paper in the cassettes.
Either: B4 paper is loaded.
B4
Or: B4 paper is selected with the paper size dial but there is no paper
in the cassettes.
Image rotation is disabled and A4(SEF), A5, LT(SEF), F4 or F size is
selected
A4
Image rotation is enabled and LT(SEF), F4, F or A5 size is selected
Status Indicator
Error Function
Red
Blinking
Red
Blinking
Red
Blinking
Red
Blinking
Green Lit
Green
Blinking
Paper size in the cassettes
2-49
SYSTEM FEATURES
Toner Paper Comm.
LED LED
Blinking
Lit
Green
Lit
Red
Lit
Printer
LED LED
Lit
Blinking