Replacing The Paper Feed Sensor - Aficio 5000L Service Manual

OPTIONAL PAPER FEED UNIT November 29, 1999

6.10.6 REPLACING THE PAPER FEED SENSOR

[A]
[B]
H306R913.WMF
1. Remove the vertical feed unit (2 screws). (See section 6.10.2.)
2. Pull out the paper feed tray.
3. Remove the screw that fastens the paper feed sensor bracket [A].
4. While pushing the actuator up, slide the paper feed sensor bracket to the left,
release the pawl on the right side, and remove the bracket.
5. After removing the connector, remove the sensor [B] from the bracket.
NOTE: This procedure is easier if you first remove the vertical feed unit or cover
above the unit that has the defective sensor.
6-48