Table of Contents
Advertisement
November 29, 1999
3. INSTALLATION
3.1 INSTALLING THE MACHINE
Refer to the Operator's Manual for the installation environment and how to install
and set up the machine.
3.2 INITIAL PROGRAMMING
Items to Program (Service Level)
Country code (NCU parameter 00)
Country code (System switch 0F)
Protocol requirements (G3 switch 0B)
PSTN access code (RAM address 4800EB)
PSTN access method (RAM address 4800DD)
Machine's serial number
Service station's fax number
PM call (System switch 01- bit 0)
Periodic service call (RAM addresses 480439 to 48043D)
Items to Program (User Administrator Level)
Clock
Initial programming items
On/off switches
Report
Fusing power control during energy saver mode
(User parameter switch 05 - bit 6)
Display
INSTALLING THE MACHINE
Function No.
Function 08
Function 01
Function 01
Function 06
Function 06
Function 14
Function 13
Function 01
Function 06
Function No.
Key Op. Tools
Key Op. Tools
Key Op. Tools
Fax Features
Key Op. Tools
Key Op. Tools
3-1
Advertisement
Table of Contents
