Setting Global Password Control Parameters - HP MSR2000 Configuration Manual

Step
2. Enable the global password
control feature.
3. (Optional.) Enable a specific
password control function.

Setting global password control parameters

The password expiration time, minimum password length, and password composition policy can be
configured in system view, user group view, or local user view. The password settings with a smaller
application scope have higher priority. Global settings in system view apply to the passwords of the local
users in all user groups if you do not configure password policies for these users in both local user view
and user group view.
The password-control login-attempt command takes effect immediately and can affect the users already
in the password control blacklist. Other password control configurations do not take effect on users that
have been logged in or passwords that have been configured.
To set global password control parameters:
Step
1. Enter system view.
2. Set the password expiration
time.
3. Set the minimum password
update interval.
4. Set the minimum password
length.
5. Configure the password
composition policy.
6. Configure the password
complexity checking policy.
7. Set the maximum number of
history password records for
each user.
Command
password-control enable
password-control { aging |
composition | history | length }
enable
Command
system-view
password-control aging aging-time
password-control update-interval
interval
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
password-control complexity
{ same-character | user-name }
check
password-control history
max-record-num
82
Remarks
By default, the global password
control feature is disabled.
By default, all four password
control functions are enabled.
Remarks
N/A
The default setting is 90 days.
The default setting is 24 hours.
•
In non-FIPS mode, the default
setting is 10 characters.
•
In FIPS mode, the default length
is 15 characters.
•
In non-FIPS mode, a default
password must contain at least
one character type and at least
one character for each type.
•
In FIPS mode, a default
password must contain at least
four character types and at
least one character for each
type.
By default, the system does not
perform password complexity
checking.
The default setting is 4.