HP MSR2000 Configuration Manual page 238

<Router> system-view
[Router] public-key local create rsa
The range of public key size is (512 ~ 2048).
If the key modulus is greater than 512, it will take a few minutes.
Press CTRL+C to abort.
Input the modulus length [default = 1024]:
Generating Keys...
........................++++++
...................++++++
..++++++++
............++++++++
Create the key pair successfully.
# Enable the SSH server function.
[Router] ssh server enable
# Assign an IP address to interface Ethernet 1/1. The Stelnet client uses this address as the
destination for SSH connection.
[Router] interface ethernet 1/1
[Router-Ethernet1/1] ip address 192.168.1.40 255.255.255.0
[Router-Ethernet1/1] quit
# Set the authentication mode for the user lines to AAA.
[Router] line vty 0 15
[Router-line-vty0-15] authentication-mode scheme
[Router-line-vty0-15] quit
# Create a local device management user client001 with the plaintext password aabbcc, service
type ssh, and the user role network-admin.
[Router] local-user client001 class manage
[Router-luser-manage-client001] password simple aabbcc
[Router-luser-manage-client001] service-type ssh
[Router-luser-manage-client001] authorization-attribute user-role network-admin
[Router-luser-manage-client001] quit
# Create an SSH user client001 with the service type stelnet and the authentication method
password. (Optional. If an SSH user is not created, password authentication is used by default.)
[Router] ssh user client001 service-type stelnet authentication-type password
2. Establish a connection to the Stelnet server:
There are different types of Stelnet client software, such as PuTTY, and OpenSSH. This example
uses an Stelnet client that runs PuTTY version 0.58.
To establish a connection to the Stelnet server:
a. Launch PuTTY.exe to enter the interface shown in
b. In the Host Name (or IP address) field, enter the IP address 192.168.1.40 of the Stelnet server.
Figure 55.
227